IES 8413 Inter-Mix 15 Extremely Flexible Seam Sealer/Adhesive - 10 oz / 300ml

A thick-set, non-sagging, firm, extremely flexible adhesive/sealant used for sealing vertical and horizontal seams and joints on automobiles and trucks. Can be used to reinforce and eliminate flutter and vibration of body panel cross members. Excellent for pickup beds and around hinges. Will hold brush marks. Excellent adhesion to: bare metal, primed metal, SMC, FRP, fiberglass, aluminum and most plastics*. Our automatic mixing system eliminates errors which are common in manual mixing. DIRECTIONS: 1. The surface must be clean and free of dirt, grease, oil, rust, old seam sealer, and other contaminants. Use IES Super Cleaning Solvent or IES Specialty Adhesive. Remove to clean the surface. 2. Prime all bare metal with epoxy or urethane primer. Allow primer to cure according to the manufacturer’s recommendations. 3. Follow the IES dual cartridge setup instructions for loading the cartridge into the dispensing gun. 4. Dispense IES 8413 Seam Sealer into the joint or seam. Smooth out if desired with a tool or finger and feather edge. 5. IES 8413 will be set up in approximately 15 minutes. 6. Scuff or sand sealer with 320 grit sandpaper prior to priming or painting. 7. Prime and paint per manufacturer’s specifications.